Sunday, December 18, 2016

Revamp your kitchen

Revamping kitchen cabinets is a major project. Take time to consider all the options before you jump in.

Replace or remodel

This is the most expensive option and depends on what you want to achieve with your kitchen. To remodel a small kitchen can vary between  $5000 and $10000. A full scale remodeling of a modern kitchen and replacement of appliances, lighting, floors etc can go up to $50 000.Apart from that it is not a job that the homeowner should tackle on his own. Professionals and sub-contractors such as a plumber, electrician etc will be involved.

European style kitchen
A less expensive option is where you decide to replace the doors and drawer fronts and have them made by a cabinet maker. The boxes and other fixed units are kept intact and the painting or refinishing can be done by yourself.

Restore

Restoration is an option when the cabinets have an acceptable color but need some cleaning and some light repairs such as replacing worn hinges or door handles, knobs etc. This is a quick and cheap option but can make a difference in the style of the kitchen.

Refinish

If you like the original wood look and you feel that the existing finish is acceptable but need a new coat to brighten it up, you can always apply a fresh coat of varnish or polyurethane sealer. This can be a risky option especially if you do not know what type of finish was previously applied – varnish, lacquer, shellac etc. It is always best to first test the new finish on the inside of a door  where it will be less visible. A less risky option is to use a furniture wax to brighten up the old finish.


Paint

Painting is the only option that will transform your kitchen into something totally new. The main advantage is that you can do it yourself and if you follow the basic principles the end result will be professional and pleasing. A painted finish will cover up most of the imperfections of the old finish and if done properly will stay beautiful for many years – and if do not like it you can always repaint it.

Wednesday, December 7, 2016

Dry Brush Paint Technique



Dry brush painting is a technique where the brush has virtually no paint and you are actually painting with a “dry” brush. It is an excellent technique to distress furniture and has the benefit that you can more acurately control the degree of distressing. The technique can be used with or without layering. If you want the natural wood grain to show through, the paint is brushed with a dry brush directly onto the bare wood. Altenatively, you can put on a base coat first and when it is completely dry use the technique with another paint colour to dry brush on top of the base colour. In both cases it should be sealed with a furniture wax or a glaze coat or a polyurithane sealer.
Dry brush paint technique on old buro

How to Dry Brush

There are two key elements to achieve a good dry brush finish – the amount of paint on your brush and the speed with which you go through the process.  To dry brush on a bare piece of wood the following steps can be followed:


  • 1.       Drabble a little paint on the underside of the lid or on a paper plate.

  • 2.       Take your brush and lightly dip it in the paint.

  • 3.       Dab the brush on a piece of cloth or a paper towel to remove excess paint. The tip of the brush must be “dry” with only a hint of paint on it.

  • 4.       Apply the paint along the grain of the wood.

  • 5.       Repeat the process but the wood must noyt be completely covered so that the grain shows through.

  • 6.       When the paint is dry you can sand with a fine sand paper (360 grit) to distress rounded edges and areas you want it to look distressed.

  • 7.       Finally seal the paint with wax or polyurithane sealer.

  • Dry brushing pdifferent paint layers can give a nice distressed look. The procedure is much then same as described but the base colour should of course be painted first. The paint must be completely dry before the dry brush technique is applied. Always seal the paint.

Best paint to use

Milk paint and chalk paint are particularly suited for dry brushing. When layering two or more colours my preference is to paint the base coat in a good Latex paint. The top colours can be layered in chalk or milk paint. 

Which colour you use to paint the base coat is a matter of personal choice but for distressing I prefer to paint the darker colour first and then to dry brush the lighter colour(s). What you are trying to achieve is the look of old paint showing through a newer coat of paint. It is for this reason that I use two dry brushes. The first is to apply the paint and the second is to blend in the top coat. 

Best brushes to use

Any good quality brush will do. For applying the paint I prefer a brush with short, stiff bristels. The reason is that you dont want an even spread of paint but rather to get a streaky effect. I take one of my older brushes and then I cut the bristles with a scicors to get an uneven brush tip. The second dry brush should have regular soft bristles so that you can lightly even out and blend in the strokes of paint. The trick is to apply the paint and immediately go over the paint with the second brush to blend in the paint while it is still wet.

Saturday, December 3, 2016

How to Paint Cast Iron Furniture



Cast iron and wrought iron furniture will lose its lustre over time and rust starts eating away on the exposed steel.  When it is time to refinish steel furniture, the best option is to paint it but care must be taken to use the correct procedure to get a durable finish. The following steps can be followed:

1. Clean the furniture

Painted cast iron chair

Use a cleaning agent such as sugar soap to wash away dirt and grime. Apply a solution of water and sugar soap with a brush and scrub to properly clean the surface. After cleaning the sugar soap must be neutralized with clean water. Leave the furniture to dry completely before starting with the next step.

2.  Remove old flaking finish and rust


Remove loose paint with a wire brush or use a drill with a wire brush bit to strip away loose paint. When you have a powder coated finish, use a sander to scuff the surface. Rust can also be treated with a rust inhibitive primer. Wipe away the rust with a tack cloth.

3. Apply a rust inhibitive primer



Apply two coats of metal primer with a paint sprayer or aerosol can. Another option is to use a good quality Direct to Metal (DTM) acrylic paint that dries to a hard durable finish.

4. Paint the furniture



Apply at least to top coats of paint. The best is to use oil based paint or alternatively DTM paint. Cast iron and wrought iron furniture should preferably be spray painted. Use a compressed air spray gun or a DIY turbo driven electric sprayer or a good quality aerosol spray can.

If you want more information on how to spray paint furniture, you will find everything you need to know in “How to Spray Paint Furniture”. Questions like what type of spray equipment can be used, what type of paint is best for spraying and how to mix paint and apply paint with a sprayer are covered in this 56 page e-book