Showing posts with label spray paint furniture. Show all posts
Showing posts with label spray paint furniture. Show all posts

Wednesday, December 28, 2011

Spray Painting Cane Furniture


Spray paint furniture- go to www.createspace.com/6533025
Cane furniture are extremely durable but will eventually need refinishing. If you are a DIY person, a good option is to spray paint the pieces. If you have some old pieces, you should consider painting it in a solid color such as soft white or cream rather than just varnishing. Paint will cover black marks and damaged parts much better and gives it a brand new appearance.

Preparing For Painting

The first step is obviously to prepare the piece by removing loose or flaking paint. The best is to use a steel wire brush or sandpaper (100 grit). It is not necessary to take off all the old paint or varnish, as long as the surface is solid and smooth, the new paint can be applied. Make sure the piece is clean and dry before putting on the primer.

What Paint To Use

I prefer to use an oil base wood primer and top coat. Most paint suppliers will provide a good primer and for a top coat I prefer to use an eggshell (mat) finish oil base paint in off-white or cream. If you are going to use a compressor sprayer you will also need some lacquer thinners to thin down the paint by adding 10% thinners to the paint and thoroughly mixing it with a flat paddle.
I am a bit skeptical to use water base paint, but many people say that the modern water paint (Latex) will provide a long lasting and durable finish. If you want to be sure that the paint will not eventually start flaking again, use a good quality oil base wood primer and paint. It will also ensure that no brown spots appear after painting where the old paint or varnish was not totally removed.

How to Spray Paint Cane Furniture

I use a small (50 liter) compressor and spray gun with a 1.7 mm nozzle to spray paint furniture. It makes it easier to reach all the little crevices and hard to get places and is also much faster than an ordinary brush. You could also use a spray can but this can become an expensive exercise.
If you are going to spray paint, build a home-made spray booth from cardboard boxes or other material around the piece to be sprayed. Make sure that you have all the necessary protective gear such as a proper respirator, safety glasses and an overall. Also ensure that you have proper ventilation when you spray (use a domestic electric fan if possible).
First turn the piece upside down to paint the underside. Make sure that all the areas are well covered with paint. Turn over the piece and do the top part. At least one or two coats of wood primer should be painted and left overnight to dry properly. When the paint has dried up properly, sand down with 360 grit sandpaper to get a smooth finish. Now apply at least two coats of top coat to provide a well covered surface that will last.

 If you want to find out more about spray painting furniture, why not have a look at my e-book - "How to Spray Paint Furniture".

Wednesday, September 28, 2011

Refinish Old Furniture – Enhance Appearance and Value



Pine cabinet resprayed in off-white
 Look out for cheap furniture at auctions, yard sales and flea markets. You can refinish old furniture and greatly enhance the appearance as well as the value. The only important consideration is that the piece must be structurally in good condition. Smaller repairs are ok but as soon as you have to replace parts and do major repairs, the costs will quickly be more than what the piece is worth.

I recently got a pine cabinet for a really good price and refinished it as shown in the picture. After removing the old varnish and filling up scratches and small nicks with white wood filler, I sprayed on a good wood primer. After leaving it over night, the next step was to sand it down with a 360 grit sand paper to a smooth finish. Then I sprayed two coats of an off white enamel paint (eggshell for a matt finish) and it came out really good. I used Plascon’s Afternoon Shower Super Enamel Pastel and it was thinned 10 parts to 1 part Thinners.

SA Pine sprays really well but because it tends to have a lot of knots, these should be treated and sealed before painting. A good knot sealer and wood filler will do the trick.